Originals Not Recommended For The Auto Document Feeder (Adf); Sizes Detectable By The Auto Paper Select - Toshiba e-studio 901 Operator's Manual

Placing Originals

Originals not recommended for the Auto Document Feeder (ADF)

Placing the following types of originals in the ADF can cause paper misfeeds or
light & black lines or result in damage to the originals. Place these originals on
1
the exposure glass instead.
• Originals other than those specified on "Sizes and Weights of Recommended
Originals".
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, alu-
minum foil, carbon paper, or conductive paper
• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Thin, highly flexible originals
• Thick originals such as postcards
• Bound originals such as books
• Transparent originals such as OHP transparencies or translucent paper
• Originals that are still wet with ink or white-out.
Note
❒ The original might become dirty if it is written with a pencil or a similar tool.

Sizes Detectable by the Auto Paper Select

Sizes detectable by the exposure glass and ADF are:
❖ Metric version
Size
Original lo-
cation
Exposure
glass
ADF
*1
You can select from 8
tem Settings). See "System Settings", General Settings Guide.
*2
8K: 390 mm - 267 mm, 16K: 267 mm - 195 mm
12
A3 B4 A4 B5
L JIS K JIS
L L K
L
" × 13", 8
1 1
/
2
A5 A5 B6 11"
×
K L JIS
K
17"
L L
× × ×
" × 13", and 8" × 13" with the User Tools (Sys-
/
4
1 1 8K 16K
8 / 8 /
2 2
" × " ×
K
*2
L
*2
L
13" 11"
K
*1
L
L
× × ×