Installing Processor - AOpen DX34R-U Easy Installation Manual

3. Installing Processor

This socket supports FC-PGA/FCPGA2 package CPU, which is the latest CPU package
developed by Intel, we strongly recommend you not to insert former PPGA-package CPU
onto it.
CPU socket
Lever
4. Installing CPU & Housing Fan
Plug in the CPU fan cable to the 3-pin CPU FAN connector. If you have housing fan, you
can also plug it on System FAN connector and AUX FAN.
FAN3
Connector
1.
Pull up the CPU socket lever and up to
90-degree angle.
2.
Locate Pin 1 in the socket and look for a
(golden) cut edge on the CPU upper interface.
Match Pin 1 and cut edge. Then insert the
CPU into the socket.
3.
Press down the CPU socket lever and finish
CPU installation.
Note: If you do not match the CPU socket
Pin 1 and CPU cut edge well, it may
damage the CPU.
CPU Pin1 and
cut edge
CPU FAN2
Connector
GND
+12V
SENSOR
CPU FAN
Connector
Note: Some CPU fans do not have
sensor pin, so that cannot support fan
monitoring.
5. Setting CPU Voltage & Frequency
Setting CPU Core Voltage
This motherboard supports CPU VID function. The CPU core voltage will be automatically
detected and the range is from 1.05V to 1.825V. It is not necessary to set CPU Core Voltage
Setting CPU Frequency
This motherboard is CPU jumper-less design, you can set CPU frequency through the BIOS
setup, no jumpers or switches are needed.
BIOS Setup > Frequency / Voltage Control > CPU Speed Setup
Core Frequency = CPU FSB Clock * CPU Ratio
CPU Ratio 3x, 3.5x, 4x, 4.5x, 5x, 5.5x, 6x, 6.5x, 7x, 7.5x, 8x, 8.5x, 9x, 9.5x, 10x, 10.5x, 11x, 11.5x,
12x, 12.5x, 13x, 13.5x, 14x, 14.5x, 15x, 15.5x and 16x
CPU FSB 66.6, 79, 83.3, 85, 87.5, 90, 92.5, 95, 100, 110, 120, 124, 129, 133.3, 138, 143, 147, 152,
154, 157, 159, 162, 166, 171, 180, 190, and 200 MHz
(By BIOS Table)
CPU CPU Core Frequency FSB Clock
Celeron 533 533MHz 66MHz
Celeron 566 566MHz 66MHz
Celeron 600 600MHz 66MHz
Pentium III 600E 600MHz 100MHz
Pentium III 650E 650MHz 100MHz
Pentium III 700E 700MHz 100MHz
Pentium III 750E 750MHz 100MHz
Pentium III 800E 800MHz 100MHz
Pentium III 850E 850MHz 100MHz
Pentium III 533EB 533MHz 133MHz
Pentium III 600EB 600MHz 133MHz
Pentium III 667EB 667MHz 133MHz
Pentium III 733EB 733MHz 133MHz
Pentium III 800EB 800MHz 133MHz
Pentium III 866EB 866MHz 133MHz
Pentium III 933EB 933MHz 133MHz
Pentium III 1G 1GHz 133MHz
Pentium III 1.13G 1.13GHz 133MHz
Warning: VIA Apollo Pro 133T chipset supports
maximum 133MHz FSB and 66MHz AGP clock, higher
clock setting may cause serious system damage.
Ratio
8x
8.5x
9x
6x
6.5x
7x
7.5
8x
8.5x
4x
4.5x
5x
5.5
6x
6.5
7x
7.5x
8.5x