Rigid type
3.
Put the child seat in the rear left
or right car seat, and attach the
child seat to the lower anchors
according to the child seat maker's
instructions.
Flexible type
4.
Follow the child seat maker's
instructions for any additional
advice on adjusting or tightening
the fit.
Protecting Children
TETHER STRAP HOOK
TETHER ANCHORAGE POINTS
5.
Attach the tether strap hook to the
tether anchorage point, and
tighten the strap according to the
child seat maker's instructions.
Make sure the strap is not twisted.
Route it between the legs of the
head restraint.
Push and pull the child seat
6.
forward and from side to side to
verify that it is secure enough to
stay upright during normal driving
maneuvers.
Driver and Passenger Safety
41