Honda 2003 Accord Owner's Manual page 153

Operating the Radio
The ignition switch must be in
ACCESSORY (I) or ON (II) to
operate the audio system. Turn the
system on by pressing the PWR/
VOL knob, or the AM or FM button.
Adjust the volume by turning the
knob.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.
You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, AUTO
SELECT, and the preset bars.
TUNE Use the TUNE bar to tune
−
the radio to a desired frequency.
Push the on the TUNE bar to
tune to a higher frequency, or push
the to tune to a lower frequency.
Hold the bar down until the display
reaches the desired frequency.
Audio System
SEEK The SEEK function
−
searches the band for a station with
a strong signal. To activate it, press
the SEEK bar ( or
release it. Depending on which side
of the SEEK bar you press, the
system scans upward or downward
from the current frequency. It stops
when it finds a station with a strong
signal.
Comfort and Convenience Features
), then
CONTINUED
151