Honda 2003 Accord Owner's Manual page 154

Audio System
The SCAN function
SCAN −
samples all the stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. You will see SCAN in
the display. The system will scan up
the band for a station with a strong
signal. When it finds one, it will stop
and play that station for
approximately five seconds. If you do
nothing, the system will then scan
for the next strong station and play
that for five seconds. When it plays a
station that you want to continue
listening to, press the SCAN button
again.
152
Comfort and Convenience Features
You can store the
Preset −
frequencies of your favorite radio
stations in the three preset bars.
Each bar will store two frequencies
on the AM band, and four
frequencies on the FM band.
To store a frequency:
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
bar.
Use the TUNE, SEEK, or SCAN
2.
function to tune the radio to a
desired station.
3. Pick the preset number (1
you want for that station. Press
the left or right side of the bar and
hold it until you hear a beep.
Repeat steps 1 to 3 to store a total
4.
of six stations on AM and twelve
on FM.
Once a station's frequency is stored,
simply press and release the left or
right side of the proper preset bar to
tune to it.
The preset frequencies will be lost if
your car's battery goes dead, is
disconnected, or the radio fuse is
removed.
6)
−