Vehicle Operation (Blue Or Red Led) - CrimeStopper Pro Start LCPRO-3 Operating Instructions Manual

A single Remote Control can control two different vehicles.
To set up the 2-Vehicle operation you must first program your remotes to Vehicle #2. Follow the "Transmitter
Programming" steps (Pg. 12) at the second vehicle and learn YOUR remote, along with vehicle #2's existing
remotes.
VEH 1 = Blue LED
VEH 2 = Red LED
To change from vehicle 1 to vehicle 2, press the VEH button on remote for about 2 seconds. The LED on
remote will change from Blue to Red. The VEH button can be used to keep remote control from accidentally
operating your vehicle.
2-VEHICLE OPERATION & PROGRAMMING
VEH
LCPRO-3
Option 27-1 must be selected for 2-Vehicle Mode
VEH
LCPRO-4
13