Start Cleaning - iRobot Braava 300 Series Owner's Manual

Start Cleaning

Place Braava on the floor within 2 to 2.5 metres of the NorthStar Navigation
Cube, facing toward the Cube.
1. Turn Braava on using the power button.
The button will light up blue when the cleaner is on.
2. To start cleaning with a DRY CLOTH just press the Sweep button.
3. To start cleaning with a WET CLOTH just press the Mop button.
1
• One blue light will start blinking on the Navigation System Indicator if
Braava detects a signal from the Cube. The light will turn solid blue once
it locks onto the Cube. If no lights appear, Braava does not detect a
NorthStar signal.
• When Braava finishes cleaning, it plays a short song, returns to where
it started and parks itself. Braava will also do this if the battery runs low
while cleaning.
• To turn Braava off, press the power button for two seconds. A tune will
play and the light will turn off.
• To turn off the NorthStar Navigation Cube, press the button on the back
corner. The light on the opposite corner will turn off.
3
2
global.irobot.com
21