Table of Contents
Advertisement
This motherboard supports Wake from on Board LAN. To use this function, please make
sure that the "Wake on Magic Packet from power off state" is enabled in Device Manager
> Intel® Ethernet Connection > Power Management. And the "PCI Devices Power On" is
enabled in UEFI SETUP UTILITY > Advanced > ACPI Configuration. After that, onboard
LAN1&2 can wake up S5 under OS.
If you install Intel® LAN utility, Marvell SATA utility or Realtek HD audio driver, this
motherboard may fail Windows® Hardware Quality Lab (WHQL) certification tests. If you
install the drivers only, it will pass the WHQL tests.
1. About the setting of "Hyper Threading Technology", please check page 55.
2. Due to Intel® CPU spec definition, please install the memory modules on DDR4_A1,
DDR4_B1, DDR4_C1 and DDR4_D1 for the first priority. If above four DDR4 DIMM
slots are fully installed, and you want to use more than four memory modules, please
install the other memory modules from left to right (from DDR4_A2, DDR4_B2, DDR4_
D2 to DDR4_C2.)
3. Before you implement Quad Channel Memory Technology, make sure to read the instal-
lation guide of memory modules on page 25 for proper installation.
EPC612D8 Series
5
Advertisement
Table of Contents
