Sanyo DP32640 Service Manual page 7

LCD PANEL REMOVAL
Lift up the LCD panel from front cabinet.
SPEAKER REMOVAL
Take off each speaker from back cabinet
[ ATTENTION ]
Confirm Mounting Wall Wire is installed when you install
the back cabinet.
KEY SW BOARD REMOVAL
Remove 1 screw (C:3x14) to take the KEY SW board off.
RC LED BOARD REMOVAL
Remove 1 screw (C: 3x14) to take the RC LED board off.
ELECTROSTATICALLY SENSITIVE DEVICES
Many solid-state devices (especially Integrated
Circuits) are Electrostatically Sensitive, and, therefore,
require special handling techniques as described
under "Servicing Electrostatically Sensitive Devices,"
on page two in this service literature.
– 7 –
Mounting Wall Wire
KEY SW Board
Back cabinet
RC LED Board
Front cabinet
C
C