Smart Codec - Samsung SNP-6321 User Manual

setup screen

Smart codec

Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
1. From the Setup menu, select the
<video & audio (
2. Click <Smart codec>.
3. Select ROI Area.
• Manual : Specify the ROI area to
monitor manually.
• Face detection : Active if a face is
recognized on the monitoring screen.
Face detection is enabled only if the
`
M
following conditions are met:
-
-
-
Only when a face-detection event is activated can the field of interest be set as face detection.
`
J
For details on face detection events, see '"Face detection". (page 129)
4. Select a quality for the ROI area.
The ROI area will be displayed in the specified quality.
5. If you set the area of interest by <manual>, then select the desired area with your
mouse and drag it.
You can specify up to 5 distinct areas.
`
6. To cancel all the settings for the area, click the [clear (
7. When done, click [apply (
The Smart codec will not be active if it is set to <Off> in <Video profile>. (page 69)
`
J
100_ setup screen
)> tab.
The face is positioned at ±45
degrees to the left or right from
the top.
The effective range of the face rotation is ±30 degrees vertically, and ±60 degrees horizontally.
The minimum size of the face is 20x20 based on the resolution of 320x240.
)].
)] button.