Connecting Dvd Player With Component Ypbpr - Sceptre E205BD-SMQC User Manual

Connecting DVD Player with Component YPbPr...

1. Make sure the power of HD Display and your DVD player is turned off.
2. Obtain a Component Cable. Connect the green color connector to both your
DVD player and YPbPr's green connector port on the back of your HD
Display.
3. Connect the blue color connector to both your DVD player and YPbPr's blue
connector port on the back of your HD Display.
4. Connect the red color connector to both your DVD player and YPbPr's red
connector port on the back of your HD Display.
5. Obtain a RCA Audio Cable.Connect the white color connector to both your
DVD player and YPbPr's white connector port on the back of your HD Display.
6. Connect the red color connector to both your DVD player and YPbPr's red
connector port on the back of your HD Display.
7. Turn on the HD Display and your DVD player.
8. Use the remote control's source button or the source button on the Display to
switch to YPbPr.
Please Note:

Sometimes DVD players will not automatically output to YPbPr.You
will need to configure your DVD player with AV connection first then
switch to YPbPr.Please reference the DVD player's manual, to
make sure the DVD player is configured to output correctly to the
Display.

This source shares audio & video jacks with AV video.
- 21 -
www.SCEPTRE.com
SCEPTRE E205 HD Display User Manual