Sceptre E205BD-SMQC User Manual page 14

purchase a MHL cable from any electronic store and connect it to
HDMI and also your cell phone. Make sure the Display's source is
changed to HDMI and turn on your cell phone. You should see an
image of your cell phone screen. HDMI also supports ROKU™
streaming stick. Plug the ROKU stick to HDMI, and switch your
source to HDMI. Afterwards use the purple colored buttons to
access ROKU functions.
DT (Optional) – This connection is for analog cable without the cable
7.
box or over-the-airwave antennas. The tuner is a hybrid tuner that
tunes to both analog and digital channels. This connection uses
coaxial RF cable. For over-the airwave digital stations please check
http://www.antennaweb.org.This tuner DOES NOT support QAM.
For digital cable, you WILL need a cable box.
USB – USB connects to USB flash drives for playing music and
8.
picture. The USB port is also used for updating the Display's
firmware.
Please Note:

This Display features a power saving function which will turn off
the Display automatically after 10 minutes of idling on a
connection with no signal. This feature is present on all
connection.

This Display does NOT support QAM under Display tuner.

TV Tuner is optional. It may not be equipped in your
product. Please check with seller, authorized distributor or
Sceptre Customer Services.
SCEPTRE E205 HD Display User Manual
- 14 -
www.SCEPTRE.com