Table of Contents
Advertisement
14
Engine compartment (with engine off)
Engine oil
Engine coolant
Power steering
fluid
Brake fluid
Clutch fluid
Belts (fan,
alternator, water
pump and air
conditioning
compressor)
Fluid leaks
HVAC air inlet
2015 F-650/750 (f67)
Owners Guide gf (ownloose), 1st Printing, December 2013
Canadian_French (fr_can)
Vehicle Inspection Guide
Use the dipstick to verify the oil level is in the
proper operating range. See Engine oil check in
the Maintenance chapter.
Look through the plastic reservoir or the clear
sight glass on the reservoir (depending upon
vehicle equipment) and verify the coolant level is
within the proper operating range. Do not
remove the pressure cap until the coolant
has cooled. See Engine coolant check in the
Maintenance chapter.
Verify that the fluid level is in the proper
operating range. See Power steering fluid check
in the Maintenance chapter.
Remove the master cylinder caps and inspect the
fluid level. See Brake fluid check in the
Maintenance chapter.
Remove the cap and inspect the fluid level. See
Clutch fluid and linkage in the Maintenance
chapter.
Inspect for glazing, fraying or cracking. There
should be no more than 5-7 cracks per rib, per
inch (2.5 centimeters).
Inspect for signs of fluid puddles or dripping fluid
on the ground under the engine, or the underside
of the engine.
Inspect for debris that may have collected on the
HVAC air inlet grille or inside the exterior module
as this may reduce system performance.
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
