Canon imageRUNNER ADVANCE 8105 Getting Started page 85

4
On the Network screen, press [Dedicated Port Settings] → specify the following .
[On]: You can set or browse detailed information on the machine with a Canon printer driver or utility (UFR II/PCL/PS printer drivers, etc.).
•
If you want to use a Canon printer driver or utility, press [On] for both <Use SNMP v. 1> and [Dedicated Port Settings].
•
You can restrict the IP addresses of computers on which items can be set or browsed. If you restrict IP addresses, it is not possible to
set or browse detailed information concerning the machine on computers other than those whose IP addresses are allowed to send or
receive data, even if <Use SNMP v. 1>, <Use SNMP v. 3>, and [Dedicated Port Settings] are set to 'On' . For details, see "TCP/IPv4 Settings, "
on p. 4-3 or see "TCP/IPv6 Settings, " on p. 4-9.
5
On the Network screen, press [Use Spool Function] → specify the following .
[On]: You can spool print jobs transmitted to this machine on the machine's hard disk.
If the PS Printer Kit is activated, take note of the following:
- If you print a file in PDF, XPS, or PS format by specifying its URL on the Remote UI, the print job will always be spooled, regardless of
the settings made under this option.
When you spool a print job on the machine's hard disk, the time required to release a computer outputting a print job is shortened.
Communication Environment Setup
3
3-13