Lumbar Support; Way Lumbar Support; Adjusting The Lumbar Support - Mercedes-Benz 2011 GLK-Class Operator's Manual

Seats
94
X
To raise: pull the head restraint up to the
desired position.
X
To lower: press release catch : and push
the head restraint down until it is in the
desired position.
Adjusting the rear seat head restraint
angle
Adjust the head restraints so that they are as
close as possible to your head.
You can only adjust the two outer head
restraints.
X
Pull or push the top of the head restraint
until it is in the desired position.
Removing and installing the rear head
restraints
G
Warning!
Occupants should only travel sitting on seats
which have the head restraints installed. In
the event of an accident, this reduces the risk
of injury for passengers seated in the rear
compartment.
X
To remove: pull the head restraint up to
the stop.
X
Press release catch : and pull the head
restraint out of the guides.
X
To re-install: insert the head restraint so
that the notches on the bar are on the left
when viewed in the direction of travel.
X
Push the head restraint down until you hear
it engage in position.

Adjusting the lumbar support

Vehicles without the memory function:
You can adjust the contour of the front seats
so as to provide optimum support for your
back.
X
Move adjustment lever : in the direction
of the arrow until the desired backrest
contour is achieved.
Adjusting the four-way lumbar
support
Vehicles with memory function:
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.