Parking Lamps - Mercedes-Benz 2011 GLK-Class Operator's Manual

X
Insert the new bulb into bulb holder ;.
Lug = of the bulb must be pointing
upward.
X
Insert bulb holder ;.
X
Push the handle of bulb holder ; in the
opposite direction from the arrow until
holder ; engages.
X
Align housing cover : and turn it
clockwise until it engages.
X
Left-hand headlamp: fasten the washer
fluid reservoir ( Y page 110).
X
Install the headlamp cover (
Standing lamps/parking lamps
X
Switch off the lights.
X
Open the hood.
X
Remove the headlamp cover (
X
Left-hand headlamp: detach the washer
fluid reservoir ( Y page 110).
X
Turn housing cover : counter-clockwise
and pull it out.
X
Pull out bulb holder ;.
X
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ;.
X
Align housing cover : and turn it
clockwise until it engages.
X
Left-hand headlamp: fasten the washer
fluid reservoir (
X
Install the headlamp cover (
Turn signal lamps/side marker lamps
X
Switch off the lights.
Y page 109).
X
Open the hood.
X
Remove the headlamp cover (
X
Left-hand headlamp: detach the washer
fluid reservoir (
X
Turn bulb holder : or ; counter-
clockwise and pull it out.
X
WY 5 W (turn signals and side marker
lamps): pull the bulb out of bulb holder :.
X
PY 21 W (turn signals): turn the bulb
counter-clockwise, applying slight
pressure, and remove it from bulb
holder ;.
X
WY 5 W (turn signals and side marker
lamps): insert the new bulb into bulb
holder :.
Y page 109).
X
PY 21 W: insert the new bulb into bulb
holder ; and turn it clockwise while
applying slight pressure.
X
Insert bulb holder : or ; and turn it
clockwise.
Changing bulbs
Y page 110).
Y page 109).
Y page 109).
Y page 110).
111
Z