Drive Program Display; Transmission Position Display; Transmission Positions - Mercedes-Benz 2011 GLK-Class Operator's Manual

Transmission position display

Transmission position display
:
Displays on the cover beside the selector
lever also indicate the current position of the
selector lever.
The displays light up when the SmartKey is
inserted in the ignition lock. The displays go
out when the SmartKey is removed from the
ignition lock.

Drive program display

Drive program display
:
Automatic transmission

Transmission positions

Park position
B
Do not shift the transmission into
position P unless the vehicle is
stationary. The parking lock should
not be used as a brake when
parking. In addition to engaging the
parking lock, you must always
apply the parking brake to secure
the vehicle.
The SmartKey can only be removed
if the transmission is in position P.
If the SmartKey is removed from
the ignition lock, the selector lever
is locked.
In the event of a fault in the vehicle
electronics, the selector lever can
be locked in position P. To release
the selector lever lock, see
"Releasing the parking lock
manually" ( Y
Reverse
C
Only shift the transmission to R
when the vehicle is stationary.
page 139).
Z
135