ZyXEL Communications STB-1001S3 Quick Start Manual page 6

2. Press the ON/OFF button on the rear of the STB-1001S3.
The light on the front of the STB-1001S3 lights up. It blinks while
the STB-1001S3 is starting up, then shines steadily green once the
STB-1001S3 is ready (this may take a little while).
The light on the front of the STB-1001S3 turns green once the
STB-1001S3 has finished starting up.
If the
the STB-1001S3's connections. Make sure that the power is
on and the Internet access device is working. If this does not
help, restart the STB-1001S3 (switch it off, then on using the
ON/OFF switch on the rear panel). If the problem persists,
contact your vendor.
3. A start-up picture displays on the television. When the STB-1001S3
has successfully started up, the Home menu displays. Your STB-
1001S3 is ready to use!
The TV pictures shown in this Quick Start Guide are examples; what you see may be
different (depending on your IPTV service provider).
6
or lights do not behave as expected, first check