Settings - Mercedes-Benz 2010 S-Class Operator's Manual

Instrument cluster control system
234
display and are based on conditions or
system status the vehicle's system has
recorded.
The vehicle status message memory function
only appears if there are any messages
stored.
G
Warning!
Malfunction and warning messages are only
indicated for certain systems and are
intentionally not very detailed. The
malfunction and warning messages are
simply a reminder with respect to the
operation of certain systems. They do not
replace the owner's and/or driver's
responsibility to maintain the vehicle's
operating safety. Have all required
maintenance and safety checks performed on
the vehicle. Bring the vehicle to an authorized
Mercedes-Benz Center to address the
malfunction and warning messages.
X
Press button = or ; to select the
Service menu.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display: 2 Messages.
X
Press button : or 9 to select the
Messages function.
X
Press button a to confirm.
For malfunction and warning messages,
see "Vehicle status messages in the
multifunction display" (
X
Use button : or 9 to scroll through
the messages.
If you turn the SmartKey in the starter switch
to position 0 and then back to position 2, all
messages will be deleted from the message
memory.
Y
page 452).
Settings menu
In the Settings menu the following functions
are available:
Switching daytime running lamp mode on
R
or off (USA only) ( Y
Setting Adaptive Highbeam Assist
R
( Y page 235)
Showing or hiding additional speedometer
R
( Y page 235)
Selecting speedometer display mode
R
( Y page 235)
Activating/deactivating the seat belt
R
adjustment function (
Switching the radar sensors on or off
R
( Y page 236)
Switching daytime running lamp mode
on or off (USA only)
X
Press button = or ; to select the
Settings menu.
X
Press button : or 9 to select the
Day Running Lamps function.
X
Press button a.
page 234)
Y page 236)