Multicontour Seats, Front - Mercedes-Benz 2010 S-Class Operator's Manual

COMAND seats
218

Multicontour seats, front

i If PRE-SAFE
pressure in the air chambers (on the sides
of the seat cushion and seat backrest) of
the front multicontour seats is increased.
i When you adjust the multicontour seat,
noises may result from pumping air into or
releasing air out of the air chambers.
To support the spine, you can individually
adjust the seat backrest contour of the front
seats by regulating the air pressure in the air
chambers of the multicontour seat.
You can adjust the following air chambers:
Sides of seat cushion
R
Sides of seat backrest
R
Seat backrest curvature in lumbar area
R
Seat backrest curvature in shoulder area
R
The settings are made on the COMAND
display.
Adjusting sides of seat cushion
This function is used to adjust the air
chambers in the sides of the seat cushion.
X
Y
Select seat (
X
Selecting Seat Sides: Slide
rotate cVd.
X
Confirming selection: Press W.
A scale appears.
®
has been activated, the air
page 216).
XVY
Scale
:
Cursor
;
Current setting
=
X
Slide
ZVÆ
setting is reached.
X
Saving setting: Press W.
Adjusting seat backrest sides
This function is used to adjust the air
chambers in the seat backrest sides.
X
Select seat (
X
Selecting Seatback Sides: Slide
rotate cVd.
X
Confirming selection: Press W.
A scale appears.
or
X
Slide
ZVÆ
setting is reached.
X
Saving setting: Press W.
or rotate until desired
cVd
Y page 216).
or rotate until desired
cVd
or
ZVÆ