Keyless-Go - Mercedes-Benz 2010 M-Class Operator's Manual

Starter switch positions
80
X
Get a jump start.
i
If the SmartKey does not belong to the
vehicle, the SmartKey can be turned in the
starter switch. However, the ignition does
not switch on and the engine does not start.

KEYLESS-GO

G
Observe Safety notes, see page 55.
Vehicles equipped with the KEYLESS-GO
feature are supplied with a SmartKey with
integrated KEYLESS-GO function and a
removable KEYLESS-GO start/stop button.
The KEYLESS-GO start/stop button must be
inserted in the starter switch and the
SmartKey present in the vehicle.
Pressing the KEYLESS-GO start/stop button
without depressing the brake pedal
corresponds to the various starter switch
positions ( Y page 79).
Pressing the KEYLESS-GO start/stop button
with the brake pedal firmly depressed will
start the engine (
The KEYLESS-GO start/stop button can be
pulled out of the starter switch easily. You can
then insert the SmartKey into the starter
switch.
i The KEYLESS-GO start/stop button does
not need to be removed from the starter
switch when you leave the vehicle.
However, always take the SmartKey with
you when you leave the vehicle. As long as
the SmartKey is in the vehicle, the vehicle's
electrical systems can be switched on or
the engine can be started using the
KEYLESS-GO start/stop button.
Y page 103).
KEYLESS-GO start/stop button
:
Starter switch
;
X
Insert the KEYLESS-GO start/stop button
into the starter switch (if not inserted
already).
X
Make sure the automatic transmission is in
park position P.
X
Do not depress the brake pedal.
KEYLESS-GO start/stop button
USA only
=
Canada only
?
Position 0
Before you press the KEYLESS-GO start/stop
button, the vehicle's on-board electronics
have status 0 (as with SmartKey removed).
Position 1
X
Press the KEYLESS-GO start/stop button
once.
This supplies power for some electrical
consumers, such as radio functions.