Mercedes-Benz 2010 M-Class Operator's Manual page 317

X
Turn housing cover ; counterclockwise
and remove it.
X
Turn bulb socket C with the bulb
counterclockwise and remove it.
X
Pull the bulb out of bulb socket C.
X
Gently press the new bulb into bulb socket
C.
X
Place bulb socket C back into the housing
and turn it clockwise until it engages.
X
Align housing cover ; and turn it
clockwise until it engages.
Parking and standing lamp bulb,
front turn signal lamp bulb,
side marker lamp bulb
X
Turn respective bulb socket =, ? or A
( Y page 314) with the bulb
counterclockwise and remove it.
X
Pull the bulb out of the bulb socket.
X
Gently press the new bulb into the bulb
socket.
X
Place bulb socket =, ? or A back into
the housing and turn it clockwise until it
engages.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following:
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
$.
Tail lamp unit
To access the tail lamp units, you first have to
remove the cover in the corresponding side
trim panel of the cargo compartment.
X
Open the tailgate.
Opening the driver's side trim panel
X
Turn lock : counterclockwise by 90°.
X
Remove cover ;.
Removing storage compartment
Example illustration: Storage compartment
without sound system
X
Remove everything from storage
compartment ;.
X
Insert a suitable object such as a coin into
the slot of lock :.
X
Turn lock : by 90° in direction of the
arrow.
X
Remove storage compartment ;.
Replacing bulbs
Z
315