Exterior Lamp Switch; Active Bi-Xenon Headlamps; Lighting - Mercedes-Benz 2010 C-Class Operator's Manual

Lighting

90
Recalling positions from memory
X
Press and hold desired memory position
button 1, 2 or 3 until the seat has moved
to the stored position completely. On the
driver's side, also wait for the steering
wheel and exterior rear view mirrors to
move to the stored position.
i Releasing the memory position button
stops movement to the stored positions
immediately.
Lighting
Notes
i
If you drive in countries with left-hand
driving, you must have the headlamps
modified for symmetrical low beams.
Relevant information can be obtained at
any authorized Mercedes-Benz Center.
i Vehicles equipped with active Bi-Xenon
headlamps:
The active Bi-Xenon headlamps increase
usable illumination over conventional
headlamps because they follow the
curvature of the road ahead. The beams of
the active Bi-Xenon headlamps shift to
either side according to the vehicle's
steering angle and speed.

Exterior lamp switch

Standing lamps, left
1 W
Standing lamps, right
2 X
Off
3 $
Daytime running lamp mode
Automatic headlamp mode
4 c
Daytime running lamp mode
Parking lamps (also tail lamps,
5 T
license plate lamps, side marker
lamps and instrument panel lamps)
Low-beam headlamps or high-beam
6 L
headlamps
Front fog lamps
7 N
Rear fog lamp
8 R
i The exterior lamps (except standing
lamps or parking lamps) go out
automatically when you remove the
SmartKey from the starter switch or open
the driver's door with the ignition switched
off.
When the parking lamps or the rear fog
lamp are switched on and you remove the
SmartKey from the starter switch and open
the driver's door, an acoustic signal
sounds.
In addition the message Switch Off
Lights appears in the multifunction
display.
Switch off the parking lamps or the rear fog
lamp manually.