Time/Date - Mercedes-Benz 2010 C-Class Operator's Manual

Control system
132
X
Press button a to change the setting.
Depending on the previous setting the
Display Unit Speed-/Odometer: will be
set to miles or km.
The selected display unit is valid for:
Odometer and trip odometer
R
Trip computer
R
Digital speedometer in the trip menu
R
Cruise control
R
Navigation displays
R
Showing or hiding additional
speedometer (vehicles with manual
transmission)
You can have an additional digital
speedometer shown on the multifunction
display. The speed is shown in the unit of
kilometers/hour (USA) or miles/hour
(Canada).
X
Press button = or ; to select the
Settings menu.
X
Press button : or 9 to select the
Instr. Cluster submenu.
X
Press button a.
X
Press button : or 9 to select the
Additional Speedometer function.
The current setting is shown.
X
Press button a to change the current
status.
Depending on the previous status, the
additional speedometer will be switched
On or Off.
Permanent display (vehicles with
automatic transmission)
You can use the Permanent Display:
function to choose to display either the
outside temperature or the speed in
kilometers (USA) or miles (Canada)
permanently.
X
Press button = or ; to select the
Settings menu.
X
Press button : or 9 to select the
Instr. Cluster submenu.
X
Press button a.
X
Press button : or 9 to select the
Permanent Display: function.
The current setting is shown.
X
Press button a to change the current
status.
Depending on the previous status, the
Permanent Display: will be switched
between Outside temperature or
Speedometer (km/h) (USA)/
Speedometer (miles) (Canada).
Time/Date submenu
Access the Time/Date submenu via the
Settings menu. Use the Time/Date
submenu to change the time and date display
settings.
The following functions are available:
Setting the time ( Y
R
Setting the date ( Y
R
Setting the time
This function is not available if your vehicle is
equipped with the COMAND system and
navigation module.
page 132)
page 133)