Tire Labeling - Mercedes-Benz 2009 M-Class Operator's Manual

Operation
Tires and wheels
until the standard display appears in the
multifunction display ( Y page 144).
X
Press button or
j k
multifunction steering wheel repeatedly
until the following message appears in the
multifunction display:
Tire Pressure Monitor
Active
Menu: R-Button
X
Press the reset button ( Y page 138).
The following message appears in the
multifunction display:
Restart tire
pressure monitor?
X
If you wish to confirm: Press button
æ.
The following message appears in the
multifunction display:
Tire Pressure Monitor
Restarted
After driving a few minutes the system
verifies that the current tire inflation
pressures are within the system's specified
range. Afterwards, the current tire inflation
258
pressures are accepted as reference values
and then monitored.
X
If you wish to cancel: Press button
on the
ç.
MOExtended system
The MOExtended system allows you to
continue driving your vehicle even if there is
a total loss of pressure in one or more tires.
You may only use the MOExtended system in
conjunction with the Run Flat Indicator
( Y page 254) or the TPMS (
i Vehicles with MOExtended system are
not factory-equipped with a TIREFIT kit.
When retrofitting with tires that do not have
run-flat characteristics, e.g. winter tires,
you should also equip your vehicle with a
TIREFIT kit. TIREFIT kits are available at any
authorized Mercedes-Benz Center.
For information on driving in case of pressure
loss in one or more tires (emergency mode),
see the "Practical Hints" section
( Y page 379).

Tire labeling

Besides tire name (sales designation) and
manufacturer name, a number of markings
can be found on a tire.
Following are some explanations for the
markings on your vehicle's tires:
Y page 255).
Uniform Tire Quality Grading Standards
1
( Y page 264)
DOT, Tire Identification Number
2
( Y page 262)
Maximum tire load (
3
Maximum tire inflation pressure
4
( Y page 263)
Y page 263)