Lighting; Date - Mercedes-Benz 2009 M-Class Operator's Manual

Example illustration for setting the hour
X
Press button or to set the hours
æ ç
or minute(s).
Setting the date
This function is not available if your vehicle is
equipped with the COMAND system and
navigation module.
X
Move the selection marker with button
to the Time/Date submenu.
or
æ ç
X
Press button or repeatedly until
j k
the message Date Set Month, Date Set
Day, or Date Set Year appears in the
multifunction display.
The selection marker is on the current
setting.
Example illustration for setting the month
X
Press button or
æ ç
month, day, or year.
Lighting submenu
Access the Lighting submenu via the
Settings menu. Use the Lighting submenu
to change the lamp and lighting settings on
your vehicle.
The following functions are available:
Setting daytime running lamp mode (USA
R
only) ( Y page 155)
Setting locator lighting ( Y page 156)
R
Setting night security illumination
R
( Y page 156)
Setting interior lighting delayed shut-off
R
( Y page 157)
Setting daytime running lamp mode (USA
only)
X
Move the selection marker with button
or
æ ç
X
Press button
the message Lamp Circuit Headlamp
appears in the multifunction display.
The selection marker is on the current
to set the
setting.
X
Press button
manual operation (Manual) or daytime
running lamp mode (Constant).
With daytime running lamp mode activated
and the exterior lamp switch in position
or U, the low-beam headlamps are
M
switched on when the engine is running.
Controls in detail
Control system
to the Lighting submenu.
or repeatedly until
j k
or to select
æ ç
155
Z