Valet Locking; Starter Switch Positions - Mercedes-Benz 2009 CLK-Class Operator's Manual

Controls in detail

Starter switch positions

Valet locking

To deny any unauthorized person access to
the trunk, e.g. when you valet park the
vehicle, lock it separately with the mechanical
key. Leave only the SmartKey less its
mechanical key with the vehicle.
Neutral position
$
Locked
%
X
Valet locking: Close the trunk.
X
Remove the mechanical key from the
SmartKey ( Y page 320).
X
Insert the mechanical key in the trunk lid
lock.
X
Turn the mechanical key clockwise to
position and remove the mechanical
%
key in that position to lock the trunk.
82
The trunk remains locked even when the
vehicle is centrally unlocked.
You can only cancel the separate trunk
locking mode by means of the mechanical
key.
X
Canceling: Insert the mechanical key in
the trunk lid lock.
X
Turn the mechanical key counterclockwise
to neutral position and remove the
$
mechanical key in that position to unlock
the trunk.
You can now open the trunk.
Starter switch positions
SmartKey
G Observe Safety notes, see
page 58.
Starter switch
For removing SmartKey (gear selector
}
lever must be in park position P)
Power supply for some electrical
$
consumers, e.g. radio
Ignition (power supply for all electrical
%
consumers) and driving position
Starting position
&
When you switch on the ignition, all lamps
(except low-beam headlamp indicator lamp,
high-beam headlamp indicator lamp, and turn
signal indicator lamps unless activated) in the
instrument cluster come on. If a lamp in the