Settings Menu - Mercedes-Benz 2008 R 320 CDI 4MATIC Operator's Manual

Controls in detail
Control system
Should the vehicle's system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display
when the SmartKey in the starter
switch is turned to position 0 or
removed from the starter switch
or
when you turn off the engine by
pressing the KEYLESS-GO* start/stop
button ( page 66) in the starter
switch once and open the driver's door
(this puts the starter switch in
position 0, same as with the SmartKey
removed from the starter switch)
i
The vehicle status message memory will
be cleared when you turn the SmartKey in the
starter switch to position 1 or 2, or when you
press the KEYLESS-GO* start/stop button once
or twice without depressing the brake pedal. You
will then only see high priority messages in the
multifunction display ( page 427).
170

Settings menu

In the Settings menu there are two
functions:
The function Reset to factory
settings? , with which you can reset all
the settings to the original factory
settings.
A collection of submenus with which
you can make individual settings for
your vehicle.
Press button è or ÿ repeatedly
until the Settings menu appears in the
multifunction display.
The following settings and submenus are
available in the Settings menu:
Function
Resetting all settings
Submenus in the Settings menu 171
Instrument cluster submenu
Time/Date submenu
Lighting submenu
Vehicle submenu
Comfort submenu*
Page
171
174
176
177
180
183