Table of Contents
Advertisement
4 Bulb socket of front fog lamp bulb
Turn bulb socket 4 counterclockwise.
Pull bulb socket 4 out of the housing.
Pull the front fog lamp bulb out of bulb
socket 4.
Insert the new front fog lamp bulb into
bulb socket 4.
Insert bulb socket 4 into the housing.
Turn bulb socket 4 clockwise until it
engages.
Plug in the electrical connector.
Insert front fog lamp 2 back into
bumper.
Fasten retaining screws 3.
Reinsert cover 1 and press it in until it
engages.
Additional turn signal lamps bulbs
The additional turn signal lamps in the
exterior rear view mirrors have LEDs.
If a malfunction occurs or LEDs fail to func-
tion, the entire turn signal unit must be re-
placed. Have the turn signal unit replaced
by an authorized Mercedes-Benz Light
Truck Center.
Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
Turn the exterior lamp switch to
position M ( page 143).
Tail lamp unit
i
To access the bulb socket, you have to
remove the cover in the corresponding side trim
panel of the cargo compartment.
Open the tailgate ( page 122).
511
Advertisement
Table of Contents
