Steering Wheel Gearshift Control - Mercedes-Benz 2008 GL 450 Operator's Manual

2008 gl-class
Table of Contents

Advertisement

Controls in detail
Automatic transmission
Effect
ç
The transmission shifts through
second gear only.
Allows the use of engine's
braking power when driving:
on steep downgrades
in mountainous regions
under extreme operating
conditions
æ
The transmission operates in
first gear only.
For maximum use of engine's
braking effect on very steep or
lengthy downgrades.
198

Steering wheel gearshift control

With drive position D selected, you can
limit or extend the gear range.
!
Allow engine to warm up under low load use.
Do not place full load on the engine until the
operating temperature has been reached.
Shift into reverse gear R or park position P only
when the vehicle is stopped.
Avoid spinning of a drive wheel for an extended
period when driving off on slippery road
surfaces. This may cause serious damage to the
drivetrain which is not covered by the
Mercedes-Benz Limited Warranty.
1 Left button: limiting gear range or
downshift
2 Right button: extending gear range or
upshift
i
You cannot shift with the steering wheel
gearshift buttons when the transmission is in
position P, N or R.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 gl 320 cdi2008 gl 5502008 gl-classGl seriesGl 320 cdiGl 450 ... Show all

Table of Contents