GE JDC27GP Use And Care Manual page 8

Surface Cooking
See Surface Cooking Guide.
Surface Cooking with
Infinite Heat Controls
At both HI positions,
OFF and
there is a slight niche so control
"clicks" at those positions; "click"
on HI marks the highest setting;
the lowest setting is LO. In a quiet
kitchen, you may hear slight
"clicking" sounds during cooking,
indicating heat settings selected are
being maintained.
Switching heats to higher settings
always shows a quicker change
than switching to lower settings.
How to Set the Controls
Step 1: Grasp control knob and
push in.
Step 2: Turn either clockwise or
counterclockwise to desired heat
setting.
Control must be pushed into set
only from OFF position. When
control is in any position other
than OFF, it may be rotated
without pushing in.
Be sure you turn control to OFF
when you finish cooking. An
indicator light will glow when
ANY heat on any surface unit is on.
Cooking Guide for
Using Heat Settings
HI—Quick start for cooking; bring
water to boil.
MEDIUM HI (setting halfway
between H] and MED)—Fast fry,
pan broil; maintain f'ast boil on
large amount of food.
slow boil on large amount of food.
MEDIUM LO (setting halfway
between MED and LO)—Steam
rice, cereal; maintain serving
temperature of most foods.
cook with little water in covered
pan.
NOTE:
1. At Hl, MEDIUM HI, never
leave food unattended. Boilovers
cause smoking; greasy spillovers
may catch fire.
2. At MEDIUM LO, LO, melt
chocolate, butter on small unit.