Pin2; Puk2; Barring Password - Samsung SGH-D500 Manual

PIN2

The PIN2 (4 to 8 digits), supplied with some SIM cards,
is required to access specific functions, such as setting
the maximum cost of a call. These functions are
available if supported by your SIM card.
If you enter an incorrect PIN2 three times in succession,
the code is disabled and you cannot access the functions
until you re-enable it by entering the PUK2.
To change the PIN2, see page 187 (Menu 9.7.8).

PUK2

The 8-digit PUK2 (PIN Unblocking Key 2), supplied with
some SIM cards, is required to change a disabled PIN2.
If you lose the code, contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the OK
soft key.
3. When the Confirm PIN2 message displays, enter
the same code again and press the OK soft key.
If you enter an incorrect PUK2 ten times in succession,
you will not be able to access the functions requiring the
PIN2. Contact your service provider for a new card.

Barring password

A 4-digit barring password is required when you use the
Call Barring function. You can obtain the password from
your service provider when you subscribe to this
function.
You can change this password in the Call barring menu
(Menu 9.5.2). See page 176 for further details.
Access codes
195