Pin; P U K 2; Pin2; Puk2 - Samsung SGH-S108 User Manual

Tri band gprs telephone
Hide thumbs Also See for SGH-S108:
Table of Contents

Advertisement

Access Codes
P I N
The P ersonal Identification N umber or PIN (4 to
8 digits) protects your SIM card against
unauthorised use. It is usually supplied with the
SIM card.
I f you enter an incorrect PIN three times in
succession, the code is disabled and cannot be
used until you re-enable it by entering the PUK
(see below).
To...
Activate/deactivate
the PIN Check feature
Change the PIN
P U K
The 8-digit PUK (P IN U nblocking K ey) is
required to change a disabled PIN. The PUK may
be supplied with the SIM card. If not, or you
have lost it, contact your service provider.
To re-enable your PIN:
1 . Key in the PUK and press the O K soft key.
2 . Enter a new PIN of your choice and press the
O K soft key.
3 . When the Confirm New PIN message is
displayed, key in the same code again and
press the O K soft key.
I f you enter an incorrect PUK ten times in
succession, the SIM card becomes inva l i d .
Contact your service provider for a new card.
118
Refer to...
Page 79
(Menu 4.6.1) .
Page 80
(Menu 4.6.2) .
P I N 2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions,
such as setting the maximum cost of a call.
These functions are available if supported by
your SIM card.
I f you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, refer to page 81 (M e n u
4.6.7) .

P U K 2

The 8-digit PUK2 (PIN Unblocking Key 2),
supplied with some SIM cards, is required to
change a disabled PIN2. If you lose the code,
contact your service provider.
To re-enable your PIN2:
1 . Key in the PUK2 and press the O K soft key.
2 . Enter a new PIN2 of your choice and press
the O K soft key.
3 . When the Confirm PIN2 message is
displayed, key in the same code again and
press the O K soft key.
I f you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your
service provider for a new card.
Access Codes
119

Advertisement

Table of Contents
loading

Table of Contents