Searching For A Location By Coordinates - Pioneer AVIC-Z150BH Operation Manual

Searching for and selecting a location
p History can store up to 100 locations. If
the entries reach the maximum, any further
entry will overwrite the oldest one.
Display the "Destination" screen.
1
= For details of the operations, refer to How to
use the navigation menu screens on page
24.
2 Touch [My POIs].
3 Touch [History].
A list of locations where you have selected ap-
pears.
4 Touch the entry you want.
The searched location appears on the map
screen.
= For subsequent operations, refer to Setting
a route to your destination on page 46.
Searching for a location by
coordinates
Entering a latitude and longitude pinpoints
the location.
Display the "Destination" screen.
1
= For details of the operations, refer to How to
use the navigation menu screens on page
24.
2 Touch [Coordinates].
3 Touch [East] or [West], and then enter
the longitude.
To enter W 50°1 2.5 for example, touch
[West], [0], [5], [0], [0], [1], [0], [2], and [5].
4 Touch [North] or [South], and then
enter the latitude.
To enter N 5°1 2.5 for example, touch [North],
[0], [5], [0], [1], [0], [2], and [5].
5 Touch [OK].
The searched location appears on the map
screen.
= For subsequent operations, refer to Setting
a route to your destination on page 46.
Chapter
04
45
En