Replicating The Settings; Using The Rear View Camera Functions - Pioneer AVIC-Z150BH Operation Manual

Customizing preferences
p Touching
closes the pop-up screen.
p When Mirror AV is selected, the following
restrictions are applied to rear display.
When selecting Rear View in the map
display, nothing is displayed.
All sounds cannot be output for the rear
display.
When playing back video files on the ex-
ternal storage device (USB, SD), the
video image is not output.
The picture may have noise if the iPod
video is output to the rear display.
p When Disc is selected, the following re-
striction is applied to rear display.
When a CD or MP3/WMA/AAC disc is
set in the built-in DVD drive, only the
sound is output.
p When iPod is selected, the following re-
striction is applied to rear display.
The picture may have noise if the iPod
video is output to the rear display.
p When AV1 or AV2 is selected, the fol-
lowing restrictions are applied to the rear
display.
The video image and sound are output
only when AV1 or AV2 has both
video and sound.
The video image and sound are output
only when the corresponding settings
on AV1 Input or AV2 Input are
On .

Replicating the settings

You can import settings you have made on the
utility program AVIC FEEDS which is available
separately to the navigation system.
p AVIC FEEDS is available on our website.
1 Use AVIC FEEDS to replicate the set-
tings and store them on an SD memory
card.
2 Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 16.
A message confirming whether to update the
settings appears.
3 Touch [Yes].
Update starts.
After the settings are updated, a message noti-
fying completion of update appears.
4 Touch [OK].
The navigation system restarts.
Using the rear view camera
functions
The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC6). (For de-
tails, consult your dealer.)
Rear view camera
The navigation system features a function that
automatically switches to the full-screen
image of the rear view camera installed on
your vehicle. When the shift lever is in the RE-
VERSE (R) position, the screen automatically
switches to full-screen rear view camera
image.
Camera for Rear view mode
Rear view can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is partially
displayed. Please note that with this setting,
camera image is not resized to fit, and that a
portion of what is seen by the camera is not
viewable.
= For details, refer to Setting for rear view
camera on page 170.
Chapter
27
169
En