Mercedes-Benz 2003 G 500 Operator's Manual page 259

Display
I
AUTOM. LIGHT ON
REMOVE KEY!
REPLACE KEY
VISIT WORKSHOP!
.
3RD BRAKE LAMP
CHECK LAMP!
ADD. TURN SIG LAMP, LH
CHECK LAMP!
ADD. TURN SIG LAMP, RH
CHECK LAMP!
AUTOM. LIGHT ON
REMOVE KEY!
Possible cause
You have forgotten to remove the
key.
No additional code available for
SmartKey.
The high mounted brake lamp is mal-
functioning. This message will only
appear if all light emitting diodes
have stopped working.
The left turn signal in the side mirror
is malfunctioning. This message will
only appear if all light emitting
diodes have stopped working.
The right turn signal in the side mir-
ror is malfunctioning. This message
will only appear if all light emitting
diodes have stopped working.
You have left the key in the starter
switch.
Practical hints
Suggested solution
Remove the key from the
starter switch.
Visit an authorized
Mercedes-Benz Light Truck
Center.
Visit an authorized
Mercedes-Benz Center as
soon as possible.
Have the LEDs replaced as
soon as possible.
Have the LEDs replaced as
soon as possible.
Remove key from the starter
switch.
What to do if ...
Category
1
2
2
2
2
1
259