Mercedes-Benz 2003 G 500 Operator's Manual page 172

Controls in detail
Loading
3 Lift tensioner
4 Tie down
Lift tensioner 3 on tie downs 4 must point
in the direction of the arrow.
172
5 Hook
6 Ring
Set the length of the tie downs 4 and
lift tensioner 3 to the rings 6.
Insert tie down hooks 5 in rings 6.
Pull on loose ends of tie downs until net
is slightly tensioned.
Fold up seat bench until it locks in
place.
The partition net will be tightened by
the rear seat bench cushion.
After driving a short period, check the ten-
sion of the partition net, retighten if neces-
sary.
Installation behind front seats
1 Partition net
2 Mounting
Fold rear seat bench fully forward
( page 169).
Engage partition net1 in holders 2.