Proper Hand Position; Variable Speed Trigger Switch - DeWalt DCF899 Instruction Manual

75-100% charged
Pack needs t obe charged
Toactuate thefuel g auge, press a ndhold thefuel g auge b utton ( L).
Acombination ofthethree g reen L ED lights w ill i lluminate designating
the level ofcharge l eft. W hen t helevel ofcharge i nthe battery isbelow
theusable l imit, the fuel g auge w ill n otilluminate and thebattery will
need t oberecharged.
51-74% charged
<50% charged
FIG. 4
NOTE: The fuel g auge i sonly anindication ofthecharge l eftonthe
battery pack. I tdoes notindicate tool f unctionality andissubject to
variation based o nproduct components, temperature andend-user
application.
For m ore information regarding fuel g auge b attery packs, please call
1-800-4-DE.:.WALT (1-800-433-9258) orvisit ourwebsite www.dewalt.
com.
Proper Hand Position (Fig. 2_ 5)
_WARNING: To reduce the risk of seriouspersonalinjury,ALWAYS use
proper hand position as shown,
_, WARNING: Toreduce the riskof seriouspersonalinjury,ALWAYS hold
securelyin anticipationof a sudden reaction,
Proper hand position requires one hand on the main handle (D).
FIG.5
Variable Speed Trigger Switch (Fig. 2)
To turn the tool on, squeeze the trigger switch (A). To turn the tool
off, release the trigger switch. Your tool is equipped with a brake. The
anvil will stop when the trigger switch is fully released. The variable
speed switch enables you to select the best speed for a particular
application. The more you squeeze the trigger, the faster the tool will
operate. For maximum tool life, use variable speed only for starting
holes or fasteners.
NOTE: Continuous use in variable speed range is not recommended.
It may damage the switch and should be avoided.
11