Mercedes-Benz 2002 M-Class Operator's Manual page 76

Install a "LATCH" type child seat according to the
manufacturer's instructions.
The child seat must be firmly attached in the right and
left side mounting fittings (1).
Non-"LATCH" type child seats may also be used and are
capable of being installed using the vehicle's seat belt
system. Install child seat according to the
manufacturer's instructions.
Note:
With a child seat installed in the left rear seat, the seat
belt for the center seat occupied by a passenger must
operate freely. Guide seat belt between its seat cushion
mount and backrest mount along outside of right side
child seat mount.
Restraint systems
Instruments
Operation
and controls
Instrument
Driving
cluster display
Warning!
The "LATCH" mounting fittings are intended for
children up to 22 kg (50 lbs) in weight.
Children too big for child restraint systems must
ride in back seats using regular seat belts. Position
shoulder belt across chest and shoulder, not face or
neck. A booster seat may be necessary to achieve
proper belt positioning for children from 41 lbs. to
the point where a lap/shoulder belt fits properly
without one.
Install child seat according to manufacturer's
instructions.
The child seat must be firmly attached in the right
and left side mounting fittings (1).
An incorrectly mounted child seat may come loose
during an accident.
Damaged or impact damaged child seats or child
seat mounting fittings must be replaced.
Do not leave children unattended in the vehicle,
even if the children are secured in a child restraint
system.
73
Practical hints Car care
Technical
Index
data