Canon LX-MW500 User Manual page 61

FUNCTION
Image Mode
Brightness
Contrast
Color
Tint
Sharpness
BrilliantColor™
Color Temperature
6-axis Color Adjust
Auto Search
Presentation Timer
Language
Image flip H/V
Auto Power Off
DESCRIPTION
Pre-defined image modes are provided so you can optimize
your projector image set-up to suit your program type. See
"Selecting a image mode" on page 42
Adjusts the brightness of the image. See
Brightness" on page 42
Adjusts the degree of difference between dark and light in
the image. See "Adjusting Contrast" on page 42
Adjusts the color saturation level -- the amount of each color
in a video image. See "Adjusting Color" on page 43
details.
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 43
The function is only available when Video or S-
Video with NTSC system is selected.
Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 43
Adjusts white peaking while maintaining correct color
presentation. See "Adjusting BrilliantColor™" on page 43
for details.
See "Selecting a Color Temperature" on page 43
See "6-axis Color Adjust" on page 43
See "Switching input signal" on page 37
Reminds the presenter to finish the presentation within a
certain time frame. See
page 45 for details.
Sets the language for the On-Screen Display (OSD) menus.
See "Using the menus" on page 34
See "Choosing a location" on page 21
Allows the projector to turn off automatically if no input
signal is detected and no operation is made by user after a set
period of time. See "Setting Auto Power Off" on page 66
details.
for details.
"Adjusting
for details.
for details.
for details.
for details.
for details.
"Setting the presentation timer" on
for details.
for details.
for details.
for
for details.
for
61