Canon LX-MW500 User Manual page 59

Main menu
5.
SYSTEM
SETUP:
Advanced
6.
INFORMATION
• * Indicates an item that is factory-set.
• The menu items are available when the projector detects at least one valid signal. If there is no
equipment connected to the projector or no signal detected, limited menu items are accessible.
Sub-menu
Security Settings
Closed Caption
Settings
Serial Port Setting
LAN Settings
Reset All Settings
Current System Status
Options
Change Password
Power On Lock On/Off*
Closed Caption On/Off*
Caption Channel CC1*/CC2/CC3/CC4
RS232*/HDBaseT
Standby LAN Off*/On
PJLink
Off*/On
Certification
Change PJLink Password
AMX Device
Off/On*
Discovery
DHCP On*/Off
Projector IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
Input
Image Mode
Color Format
Resolution
Lamp Time
Filter Time
59