Canon LX-MW500 User Manual page 18

Remote control: LV-RC08
1
2
3
4
5
6
7
1. POWER (ON/STANDBY)
I
I
Toggles the projector between standby mode and
on. See "Starting up the projector" on page 33
"Shutting down the projector" on page 47
details.
2. INPUT
Displays the source selection bar. See
input signal" on page 37
3. Left
Selects the desired menu items and makes
adjustments. See
details.
4. BLANK
Used to hide the screen picture. See
image" on page 46
5. TIMER
Activates or adjusts some basic settings of an on-
screen timer. See
45 for details.
6. D.ZOOM (+, -)**
Magnifies or reduces the projected picture size.
See "Magnifying and searching for details" on
page 40 for details.
7. MUTE
Temporarily mutes the audio. See
sound" on page 47
8. MENU
Turns on the On-Screen Display (OSD) menu.
Goes back to previous OSD menu, exits and saves
menu settings. See
for details.
** When the projector and computer are connected via
USB, the function (Page UP/Page DOWN) which
operates the computer from the remote controller is set.
18
8
9
10
11
12
13
9
14
"Switching
for details.
"Using the menus" on page 34
"Hiding the
for details.
"Using the TIMER key" on page
"Adjusting the
for details.
"Using the menus" on page 34
9. Keystone/Arrow keys (
Manually corrects distorted images resulting from
an angled projection. See
page 39
10. AUTO PC
Automatically determines the best picture timings
for the displayed image. See
image" on page 38
11. Right/
Activates panel key lock. See
keys" on page 46
When the On-Screen Display (OSD) menu is
activated, the #3, #9 and #11 keys are used as
directional arrows to select the desired menu items
and to make adjustments. See
on page 34
12. FREEZE
Freezes the projected image. See
and
image" on page 46
for
13. OK/IMAGE
Enacts the selected On-Screen Display (OSD)
menu item.
Selects an available picture setup mode. See
"Selecting a image mode" on page 42
14. VOL keys (+, -)
Adjusts the sound level. See
for
on page 47
When you are under the MHL connection
mode and the projector OSD is off, these
buttons are available for controlling your
smart device: arrow keys, OK/IMAGE,
AUTO PC.
3, 9 and 11: arrows keys
Arrows keys are available for controlling your
smart device.
10. AUTO PC
Use the key to return or exit the OSD menu of
your smart device.
13. OK/IMAGE
Use the key to confirm the selection on the
OSD of your smart device.
To enter the MHL connection mode, connect a
MHL device (See
compatible smart device" on page 28
details.) and switch the input signal to HDMI/
MHL (See
for details.).
Attention of the MHL device connection (See
"Connecting a MHL-compatible smart device"
on page 28
/ Up,
"Correcting keystone" on
for details.
"Auto-adjusting the
for details.
"Locking control
for details.
"Using the menus"
for details.
for details.
"Adjusting the sound"
for details.
"Connecting a MHL-
"Switching input signal" on page 37
for details.)
/ Down)
"Freezing the
for details.
for