Mercedes-Benz 2000 E 430 Operator's Manual page 276

6. Insert jack arm fully into the tube hole up to the
stop. Place jack on firm ground. Position the jack so
that it is always vertical (plumb-line) as seen from
the side (see arrow), even if the vehicle is parked on
an incline.
7. Jack up the vehicle until the wheel is clear of the
ground. Never start engine while vehicle is raised.
Tires, Wheels
Instruments
Operation
and controls
P40.10-2133-26
273
Instrument
Driving
cluster display
1
8. Unscrew upper-most wheel bolt and install
alignment bolt (1) supplied in the tool kit. Remove
the remaining bolts. Keep bolt threads protected
from dirt and sand.
9. Remove wheel. Grip wheel from the sides. Keep
hands from beneath the wheels.
Practical hints Car care
P40.10-2134-26
Technical
Index
data