Tele Aid - Mercedes-Benz 2000 E 430 Operator's Manual

Instruments
Operation
and controls

Tele Aid

Tele Aid
Important!
The initial activation of the Tele Aid system may only be
performed by completing the subscriber agreement and
placing an acquaintance call using the "SOS" button.
Failure to complete either of these steps will result in a
system that is not activated. If the system is not
activated the indicator lamp in the "SOS" button stays
on after turning electronic key in starter switch to
position 2 and the message "TELE AID – NOT
ACTIVATED" will be shown in the multifunction display
for approx. 10 seconds.
If you have any questions regarding activation, please
call the Response Center at 1-800-756-9018 (in the USA)
or 1-888-923-8367 (in Canada).
(Telematic Alarm Identification on Demand)
The Tele Aid system consists of three types of response;
automatic and manual emergency, roadside assistance
and information.
The Tele Aid system is operational providing that the
vehicle's battery is charged, properly connected, not
damaged and cellular and GPS coverage is available.
Instrument
Driving
cluster display
178
Practical hints Car care
The speaker volume of a Tele Aid call can be adjusted
when using the volume control on the multifunction
steering wheel, for raising press button æ and for
lowering press button ç.
To activate, press the "SOS" button, the Roadside
Assistance button • or the Information button ¡,
depending on the type of response required.
Shortly after the completion of your Acquaintance Call,
you will receive a user ID and password via first call
mail. By visiting www.mbusa.com and selecting
"Tele Aid" (USA only), you will have access to account
information, remote door unlock, Info Services
and more.
* Optional – available only with COMAND
System self-check
Initially, after turning the electronic key in starter
switch to position 2, malfunctions are detected and
indicated (the indicator lamps in the "SOS" button, the
Roadside Assistance button • and the Information
button ¡ stay on longer than 10 seconds or do not
come on). The message "TELE AID – VISIT
WORKSHOP" appears for approx. 10 seconds in the
multifunction display.
Technical
Index
data
*
profile