Malfunction And Indicator Lamps In The Instrument Cluster; On-Board Diagnostic System; Check Engine Malfunction Indicator Lamp; Practical Hints - Mercedes-Benz 2000 E 430 Operator's Manual

E-class
Hide thumbs Also See for 2000 E 430:
Table of Contents

Advertisement

Instruments
Operation
and controls
Malfunction and indicator lamps
Malfunction and indicator lamps
in the instrument cluster
General information:
If a bulb in the instrument cluster fails to light up
during the bulb self-check when turning the electronic
key in steering lock to position 2, have it checked and
replaced if necessary.

On-board diagnostic system

Check engine malfunction indicator lamp

Engine malfunction indicator lamp. If the
CHECK
"CHECK ENGINE" malfunction indicator
ENGINE
lamp comes on when the engine is running,
it indicates a malfunction of the fuel management
system, emission control system, systems which impact
emissions, or the fuel cap is not closed tight (check the
fuel cap). If the "CHECK ENGINE" lamp is illuminated
continuously and the vehicle is driving normally, you
may still drive the vehicle, however, in all cases, we
recommend that you have the system checked at your
authorized Mercedes-Benz Center as soon as possible.
Instrument
Driving
cluster display
234

Practical hints

Car care
If the "CHECK ENGINE" lamp comes on continuously
and/or the vehicle is not driving normally, serious
damage can occur to the emission system. Please
contact your authorized Mercedes-Benz Center
immediately.
The Sequential Multiport Fuel Injection (SFI) control
module monitors emission control components that
either provide input signals to or receive output signals
from the control module. Malfunctions resulting from
interruptions or failure of any of these components are
indicated by the "CHECK ENGINE" malfunction
indicator lamp in the instrument cluster and are
simultaneously stored in the SFI control module.
If the "CHECK ENGINE" malfunction indicator lamp
comes on, have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
With some exceptions, the control module switches off
the "CHECK ENGINE" malfunction indicator lamp if the
condition, causing the lamp to come on, no longer exists
during three consecutive cycles. See also page 236 for
fuel cap placement warning.
Technical
Index
data

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents