Motorola EX600 User Manual page 63

Sending a Call
1. Select appropriate zone.
2. Turn Channel Selector knob to desired channel.
3. Press PTT button and speak clearly with mouth about 2.5 to 5 cm (1 to 2
inches) away from microphone.
4. Release PTT button to listen.
Receiving a Call
1. Turn radio on and set volume level.
2. Switch to desired channel.
3. When a call is received, it will be heard at the volume level you set.
Deleting a Nuisance Channel During Scanning
1. While on a nuisance channel, press and hold preprogrammed Scan button
until you hear a tone.
2. Release Scan button.
Making a Phone Call
1. Press Phone button, or select Phone from the menu.
2. Send access code, if required.
3. Send phone number in one of the following ways:
• Press and release PTT button to send last dialed number.
— or —
• Press preprogrammed Speed Dial button, followed by a keypad key (1–9),
to access first nine numbers in your phone list. (Press PTT button if buff-
ered dial.)
— or —
• Enter phone number using the keypad. (Press PTT button if buffered dial.)
4. Hold radio in vertical position with microphone about 2.5 to 5 cm (1 to 2
inches) away from your mouth. Press PTT button to talk; release it to listen.
Ending a Phone Call
1. Send de-access code, if required.
2. Press preprogrammed Phone button, or press (.
Sending and Cancelling an Emergency Alert
• Press preprogrammed Emergency button (Top button [D]) to activate
Emergency Alert .
Record the functions for your radio's programmable buttons in the table
provided below. For further information, see pages 17 and 18 in this User
Guide.
Channel Selector Knob
On/Off/Volume Knob
Push-to-Talk (PTT)
Button
Side Button 1
(programmable)
Side Button 2
(programmable)
Button Function Short Press
™
EX600 Quick Reference Card
Top Button
(programmable)
LED Indicator
Microphone
LCD Screen
Menu Keys
P1, P2, P3 Keys
(programmable)
Keypad
Long Press Hold Down Page