Specifications - Insignia NS-DCR30A2 User Manual

NS-DCR30A2-NS-DCR30A2-C_15-0920_MAN_V3_ENG.fm Page 9 Friday, December 4, 2015 1:08 PM
NS-DCR30A2/NS-DCR30A2-C Multi-Format Memory Card Reader
Symptom
Memory cards appear in My Computer or
Computer (Windows operating systems) or on
the desktop (Mac operating systems) but errors
occur when writing or reading.
No icon appears when a card is inserted into the
reader (MAC OS X).
File transfer is very slow or not any faster than a
USB 2.0 card reader.

Specifications

Supported file systems FAT 12/16/32, NTFS, and exFat
Five memory card slots CF slot
SD/SDHC/MMC slot
MS Pro Duo/MS Pro slot
microSD slot
M2 slot
Indicators Card detected: Blue LED on (USB 3.0) or green LED on (USB 2.0)
Data access: Blue LED flashing (USB 3.0) or green LED flashing (USB 2.0)
Supported cards CompactFlash (I & II, UDMA), Secure Digital (SD, SDHC, SDXC, Mini SD*),
MultiMediaCard (MMC, MMC plus, RS-MMC*), and Memory Stick (MS, MS Pro,
MS Duo, MS Pro Duo, MS Pro HG, M2) cards, microSDHC, microSD.
Note: Cards marked with * require an adapter.
USB Cable USB 3.0 A-type plug to micro-USB 3.0 plug
OS Support Windows XP, Windows Vista, Windows 7, Windows 8 and 8.1, Mac OS 10.4 or
higher
Dimensions (L × D × H) 1.7 H x 3.3 W x 0.6 D in. (4.4 x 8.42 x 1.6 cm)
Operating temp. 32° F~104° F (0° C~40° C)
Storage temperature
Certification FCC Class B, ICES-003
Solution
• Make sure that the memory card is fully inserted into the slot.
• Try a different memory card of the same type in the same slot. If the
different memory card works, the original memory card should be
replaced.
• Some cards have a read/write security switch. Make sure that the
security switch is set to Write Enabled.
• Make sure that the amount of data you attempted to store has not
exceeded the capacity of the card.
• Inspect the ends of the memory cards for dirt or material closing a
hole. Clean the contacts with a lint-free cloth and small amounts of
isopropyl alcohol.
• If errors persist, replace the memory card.
• Some memory cards, such as SDXC, are not compatible with XP.
Refer to your card manufacturer to see if your card is compatible
with your OS.
• Is you are using a USB extension cable with the card reader, or using
a USB hub, try plugging the card reader directly into the USB port
on your computer using the supplied three foot USB 3.0 cable.
• The card may have been formatted in Windows FAT 32 format.
Using a PC or digital device, reformat the card using
OS X-compatible FAT or FAT16 format.
• Caused by slower speed (lower class) cards with slow transfer rates.
Upgrade to a faster class of card (for example, Class 10) to improve
transfer speed.
-4° F~140° F (-20° C~60° C)
www.insigniaproducts.com 9