NS-DCR30A2-NS-DCR30A2-C_15-0920_MAN_V3_ENG.fm Page 7 Friday, December 4, 2015 1:08 PM
NS-DCR30A2/NS-DCR30A2-C Multi-Format Memory Card Reader
2 Open the Finder window, then click on the card's name in the left menu to
view its contents.
3 Use normal Mac procedures for opening, copying, pasting, or deleting files
and folders.
To remove a memory card using Mac OS X:
1
When you have finished working with the files on the memory card, drag the
memory card icon to the Eject icon or right-click the name of the memory
card on the desktop, then select Eject.
2 When the data LED stops blinking, carefully remove the memory card. The
name of the card disappears from the Finder window.
Data LED
Indicates when a slot is reading from or writing to a card.
•
LED Off–Your card reader is not being used.
•
LED On–A card is inserted in one of the slots.
•
LED flashing–Data is being transferred to or from a card and the computer.
Formatting a memory card in Windows
If your computer has trouble recognizing a new memory card, format the memory
card in your device or by using the following procedure.
To format a memory card in Windows:
1
Click Start, then click My Computer or Computer.
2 Under Removable Storage, right-click the appropriate memory card drive.
3 Select Format.
4 Type a name into the Volume Label box. The name of your memory card
appears next to the drive.
5 Click Start, then click OK in the Warning dialog box.
6 Click OK on the Format Complete window.
7 Click Close to finish.
Caution
Formatting a memory card permanently deletes all files on the
card. Be sure that you copy any valued files to a computer before
formatting a memory card. Do not disconnect the card reader or
remove the memory card while formatting is in progress.
www.insigniaproducts.com
7