Using Your Card Reader; Connecting Your Card Reader - Insignia NS-DCR30A2 User Manual

NS-DCR30A2-NS-DCR30A2-C_15-0920_MAN_V3_ENG.fm Page 6 Friday, December 4, 2015 1:08 PM

Using your card reader

Connecting your card reader

• Plug one end of the USB cable into the card reader, then plug the other end
into an available USB port on your computer. Your computer loads the drivers
automatically and a removable disk drive icon appears in the My
Computer/Computer (Windows Vista) window or your desktop on Mac OS X.
To access a memory card using Windows:
1 Insert a card into the appropriate slot, label side up (except for CF and
SD/MMC slots, which require that cards be inserted label side DOWN). The
data LED lights.
2 Click Start, then click My Computer or Computer. Double-click the
appropriate drive to access the data on the memory card.
3 To access files and folders on the memory card, use normal Windows
procedures for opening, copying, pasting, or deleting files and folders.
To remove a memory card using Windows:
1 When you have finished working with the files on the memory card, right-click
the memory card drive in My Computer or Computer or Windows Explorer, then
click Eject. The data LED on the memory card reader turns off.
2 Carefully remove the memory card.
To access a memory card using Macintosh OS X 10.4 or higher:
1 Insert a card into the appropriate slot, label side up (except for CF and
SD/MMC slots, which require that cards be inserted label side DOWN). The
data LED lights and a new memory card icon appears on the desktop.
6
NS-DCR30A2/NS-DCR30A2-C Multi-Format Memory Card Reader
Cautions
• Insert a card into the appropriate slot, label side up (except
for CF and SD/MMC slots, which require that cards be
inserted label side DOWN). The data LED lights. Failure to do
so may result in damage to your card and/or card reader.
• Do not insert or remove memory cards while the green or
blue data LED on the reader is flashing. Doing so may cause
damage to your card or loss of data.
• This card reader supports multiple cards at the same time,
such as CF+MS+SD+microSD or CF+MS+SD+M2. It does
not support microSD and M2 cards at the same time.
Note
If you connect this card reader to a USB 2.0 port, the green LED
lights. When you transfer data over USB 2.0, the green LED
blinks. If you connect this card reader to a USB 3.0 port, the blue
LED lights. When you transfer data over USB 3.0, the blue LED
blinks.
www.insigniaproducts.com