Memorex MLTD2622 User Manual page 23


Press the INPUT button on the remote to display the Input List. Use the ▲▼ buttons to
select TV and press the OK button.
Main
 TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
DVD
USB
CARD READER
VIDEO6 (HDMI1)
VIDEO7 (HDMI2)
COMPUTER(VGA)

Press the MENU button on the remote control to display the Main menu, and use the ◄►
buttons to select the TV.
Channel Scan
Tuner Mode
Channel Skip
Favorite List
Time Zone

Press the ▼ button to select Channel Scan, and press the
The Channel Scan automatically creates a list of receivable channels. Press the MENU
button at any time to interrupt the memorization process.(the list cannot be created if
interrupted)
Status: Scanning.....
Analog Channels: 25
Digital Channels: 0
The Channel Scanning will create a list of receivable channels for the current
input (antenna or cable). You will be required to run Channel Scanning for each
RF input to create a list of available channels from both inputs.

Press the OK button to display the received channel list, then press ▲▼ to select a
channel at press OK button to confirm. Or, use the▪ (INPUT button) with 0-9 buttons
to select digital channel(for example 9.1)
Channel List
5-2 RF5-2
9-1 KQED-HD
9-2 KOED-SD
8 CCT
12
13
15
The digital main channel might include many subchannels (for example 9-1, 9-
2..) that are showing program at the same time.
TV
Cable
Eastern Time
Enter Select Exit
.
Cable
47%
21
Chapter 2 Installing the LCD TV
button.
OK